The Acura RSX is a successful sport coupe that was introduced into the Acura lineup in 2002 to replace the previous model Integra. Owned by the Honda Motor Corporation, the Acura brand name has been Honda’s luxury and near luxury car label in the United States, Canada, Mexico, and Hong Kong since March 1986. The Acura RSX has always managed to stay on top in its very competitive sport coupe class by providing excellent performance with pleasing luxury and build quality. Appreciated by both the car enthusiast and the gear head, the Acura RSX can be seen on the road as both a classy sport coupe or a track-ready canyon carver. The Acura RSX suspension employs MacPherson struts in the front and double-wishbone suspension in the rear. The 155 hp K-series engine proves to have significant potential for tuning, a trait shared with the B-series engines previously employed in the Integra and certain performance-oriented Civic models. Like both the previous Integra and current Honda Civic Si, there is a booming performance aftermarket industry for the car and a large following of faithful RSX owners.

The codes of up to three transmitters can be read into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.) NOTE: It is important to maintain the time limits between the steps. Make sure the doors and the hatch are closed. 1. Turn the ignition switch ON (II). 2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 3. Within 1 to 4 sec., turn the ignition switch OFF. 4. Within 1 to 4 sec., turn the ignition switch ON (II). 5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 6. Within 1 to 4 sec., turn the ignition switch OFF. 7. Within 1 to 4 sec., turn the ignition switch ON (II). 8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 9. Within 1 to 4 sec., turn the ignition switch OFF. 10. Within 1 to 4 sec., turn the ignition switch ON (II). 11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS! Within 1 to 4 sec., push the transmitter lock or unlock button again. 13. Within 10 sec., aim any remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored. 14. Turn the ignition switch OFF, and pull out the key. 15. Confirm proper operation of the transmitters.

The codes of up to three transmitters can be read into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.) NOTE: It is important to maintain the time limits between the steps. Make sure the doors and the hatch are closed. 1. Turn the ignition switch ON (II). 2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 3. Within 1 to 4 sec., turn the ignition switch OFF. 4. Within 1 to 4 sec., turn the ignition switch ON (II). 5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 6. Within 1 to 4 sec., turn the ignition switch OFF. 7. Within 1 to 4 sec., turn the ignition switch ON (II). 8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 9. Within 1 to 4 sec., turn the ignition switch OFF. 10. Within 1 to 4 sec., turn the ignition switch ON (II). 11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS! Within 1 to 4 sec., push the transmitter lock or unlock button again. 13. Within 10 sec., aim any remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored. 14. Turn the ignition switch OFF, and pull out the key. 15. Confirm proper operation of the transmitters.

The codes of up to three transmitters can be read into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.) NOTE: It is important to maintain the time limits between the steps. Make sure the doors and the hatch are closed. 1. Turn the ignition switch ON (II). 2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 3. Within 1 to 4 sec., turn the ignition switch OFF. 4. Within 1 to 4 sec., turn the ignition switch ON (II). 5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 6. Within 1 to 4 sec., turn the ignition switch OFF. 7. Within 1 to 4 sec., turn the ignition switch ON (II). 8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 9. Within 1 to 4 sec., turn the ignition switch OFF. 10. Within 1 to 4 sec., turn the ignition switch ON (II). 11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS! Within 1 to 4 sec., push the transmitter lock or unlock button again. 13. Within 10 sec., aim any remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored. 14. Turn the ignition switch OFF, and pull out the key. 15. Confirm proper operation of the transmitters.

The codes of up to three transmitters can be read into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.) NOTE: It is important to maintain the time limits between the steps. Make sure the doors and the hatch are closed. 1. Turn the ignition switch ON (II). 2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 3. Within 1 to 4 sec., turn the ignition switch OFF. 4. Within 1 to 4 sec., turn the ignition switch ON (II). 5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 6. Within 1 to 4 sec., turn the ignition switch OFF. 7. Within 1 to 4 sec., turn the ignition switch ON (II). 8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 9. Within 1 to 4 sec., turn the ignition switch OFF. 10. Within 1 to 4 sec., turn the ignition switch ON (II). 11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS! Within 1 to 4 sec., push the transmitter lock or unlock button again. 13. Within 10 sec., aim any remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored. 14. Turn the ignition switch OFF, and pull out the key. 15. Confirm proper operation of the transmitters.

The codes of up to three transmitters can be read into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.) NOTE: It is important to maintain the time limits between the steps. Make sure the doors and the hatch are closed. 1. Turn the ignition switch ON (II). 2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 3. Within 1 to 4 sec., turn the ignition switch OFF. 4. Within 1 to 4 sec., turn the ignition switch ON (II). 5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 6. Within 1 to 4 sec., turn the ignition switch OFF. 7. Within 1 to 4 sec., turn the ignition switch ON (II). 8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 9. Within 1 to 4 sec., turn the ignition switch OFF. 10. Within 1 to 4 sec., turn the ignition switch ON (II). 11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS! Within 1 to 4 sec., push the transmitter lock or unlock button again. 13. Within 10 sec., aim any remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored. 14. Turn the ignition switch OFF, and pull out the key. 15. Confirm proper operation of the transmitters.

The codes of up to three transmitters can be read into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.) NOTE: It is important to maintain the time limits between the steps. Make sure the doors and the hatch are closed. 1. Turn the ignition switch ON (II). 2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 3. Within 1 to 4 sec., turn the ignition switch OFF. 4. Within 1 to 4 sec., turn the ignition switch ON (II). 5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 6. Within 1 to 4 sec., turn the ignition switch OFF. 7. Within 1 to 4 sec., turn the ignition switch ON (II). 8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 9. Within 1 to 4 sec., turn the ignition switch OFF. 10. Within 1 to 4 sec., turn the ignition switch ON (II). 11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver under the audio unit. 12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS! Within 1 to 4 sec., push the transmitter lock or unlock button again. 13. Within 10 sec., aim any remaining transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored. 14. Turn the ignition switch OFF, and pull out the key. 15. Confirm proper operation of the transmitters.

2005 Chevrolet Silverado Owners Manual Book Set THESE ITEMS ARE IN GOOD USABLE CONDITION, UNLESS OTHERWISE STATED. SOME OF THESE MANUAL ARE IN NEW OR LIKE NEW CONDITION, HOWEVER THEY ARE USED. IF YOU WANT TO KNOW THE EXACT CONDITION, AND YOU CANNOT TELL BY THE PICTURE EMAIL ME INCLUDES: OWNERS GUIDE\MANUAL AND MORE

2007 Acura MDX: Step 1 Gather the remote for the vehicle on hand. Step 2 Sit in the car with all doors/trunk tightly closed. Step 3 Turn the key to the ON position, marked by “II” on the ignition bezel so the dash lights come on. Step 4 Listen for a quiet click, and then within 5 seconds press the “Lock” button on the remote for 1 second. Step 5 Turn the key to the OFF position, marked by “I” on the ignition bezel so the dash lights go off. If you hear a quiet click in the dashboard after turning switch to "I" then the entire process must be restarted. Step 6 Repeat three more times (for a total of 4 times). Step 7 Upon the 4th turning of the key to “ON”, press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off. Press lock button 2 more times, and then press unlock. Step 8 Turn ignition completely off and remove the key. Step 9 Step out of car and close door. The remotes should be programmed and work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will “pop”. Tips You must wait for the slight clicking sound in the dash before you press the lock button on the remote. After you reprogram if the Unlock button doesn't work, you must Unlink memory seat by pressing same time unlock and lock button pointed to receiver.(this for TL key fob) Warnings Each step must be completed within 5 seconds. All the doors and rear hatch/trunk must be closed during programming.

2007 Acura MDX: Step 1 Gather the remote for the vehicle on hand. Step 2 Sit in the car with all doors/trunk tightly closed. Step 3 Turn the key to the ON position, marked by “II” on the ignition bezel so the dash lights come on. Step 4 Listen for a quiet click, and then within 5 seconds press the “Lock” button on the remote for 1 second. Step 5 Turn the key to the OFF position, marked by “I” on the ignition bezel so the dash lights go off. If you hear a quiet click in the dashboard after turning switch to "I" then the entire process must be restarted. Step 6 Repeat three more times (for a total of 4 times). Step 7 Upon the 4th turning of the key to “ON”, press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off. Press lock button 2 more times, and then press unlock. Step 8 Turn ignition completely off and remove the key. Step 9 Step out of car and close door. The remotes should be programmed and work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will “pop”. Tips You must wait for the slight clicking sound in the dash before you press the lock button on the remote. After you reprogram if the Unlock button doesn't work, you must Unlink memory seat by pressing same time unlock and lock button pointed to receiver.(this for TL key fob) Warnings Each step must be completed within 5 seconds. All the doors and rear hatch/trunk must be closed during programming.